BURNOUTBOX.NET

351MUSTANG · 351MUSTANG

What is everyones plans this winter?Lets us know and keep us posted and post pictures.

batcrbs · batcrbs

Building a car to take the 540 engine from the 55 Chevy so I don't have to put a roll bar in the 55 and/or risk wrecking it .

LS1NOVA67 · LS1NOVA67

Started on a new project. 88 mustang hatch body pretty much for drag radial racing and some street use. Will consist of a 408 LS with ported LS3 heads, carb and a big nitrous kit. TH400 with brake, 8.8 rear with spool and 33 spline axles. AJE front tubular frame and coilovers in front. Cage all done and jus...

351MUSTANG · 351MUSTANG

I started on my floors today.I still have alittle cutting to do and then start welding it in, [IMG]http://i3...

LX546 · LX546

I bought it 15 years ago when I was 16 and it was my daily driver for 5 years. Then I turn it into my race car. It has spent the last 10 years as a mid nine second drag car. Now that I own another drag car it is time to put this one back on the street. -...

LeadFootedRacer · LeadFootedRacer

1987 Camaro LT. Started out as a parts car for my sister's 89 RS, and now i'm going to completely go through it and make it something special. PLANS: EXTERIOR: Do all body work Z28 Ground Effects with Custom SS Rocker Emblems 4" Cowl Hood (Goodmark Steel) 2002 Toyota Echo Indigo Ink Pearl Paint Pai...

91notchback · 91notchback

almost mini tubbed thru the floor subframes,rust and rot free we got rid of the swaybar mounts,and smoothed engine bay all in all nice car/project [IMG]http://i646.photobucket.com/albums/uu188/redn...

62BELAIR · 62BELAIR

just picked up a 72 el camino, california car, originaly gold now black, 350, auto, a/c,

paul c · paul c

thats all, no pics or anything. i have been blabbing about it for the past 8 months and it is finally there. getting an 8.50 cert cage, frame connectors and a nice driveshaft loop. just got the car running about 1 hour before i put it on the trailer. should be ready in about a week and a half.

paul c · paul c

i got it dyno tested and it made 473 hp @ 5200 and 526 ft. lb. @ 4200. was already making 500 ft. lb. @ 3000 where the dyno started reading. i am starting on the rear end which is a 12 bolt which will have the big bearing ford ends welded on which also use the gm drum brakes, 33 spline axles, detriot tru-trac w/ 3....

Bigblock73 · Bigblock73

I picked up a 68 Coronet 4 door back around September. I just really started wrenching on it when i have some spare time. Progress so far.... Rebuilt stock bottom end 360. Rebuilt 2.02 1.60 heads with mild porting, SS pro flo valves, milled, etc... High rise dual plane air gap intake Hooker super comp h...

G-DOG · G-DOG

stage one done -- Edited by G-DOG on Friday 22nd of July 2011 05:09:11 PM

1972468bb · 1972468bb

Picked up another stang today. 84 notch. 6 cyl/auto. Won't stay that way for long though. http://i274.photobucket.com/albums/jj255/Bigblock72camaro/007-7.jpg http://i274.photobucket.com/albums/jj255/Bigblock72camaro/006-4.jpg http://i274.photobucket.com/albums/jj255/B...

351MUSTANG · 351MUSTANG

monte · monte

well here it is the newest project in way better shape than the regal...the plan is to keep exterior the way it is with maybe just a cowl hood for clearence... gonna clean up engine bay and patch a couple rot spots....convert it from tbi to carbed and clean up the engine bay to make it look nice [IMG]http...

paul c · paul c

set up the t&d rockers using the mid-lift method, ordered the push rods and unfortunately new valve covers (had to get moroso sheetmetal ones due to the intake rockers contacting the moroso cast ones) got a good deal on amazon though, 309.00 compared to 370.00 through summit. also finished port...

Bonz · Bonz

Dart SHP 4.125" 8.2" block Scat forged 3.4" crank Scat forged H-beam 5.4" rodzzz Probe 11.0:1 forged pistons Internally balanced Melling oil pump ARP studded thru-out Milodon pan with crank scraper and windage tray 250*/260* .672"/.680" custom solid roller 10...

351MUSTANG · 351MUSTANG

Project-RS · Project-RS

well ill be starting on the camaro soon. i picked up a australian 9 bolt rear end (m78) for $100. when the weather breaks ill go to jims and get the numbers off the cover and see what they mean. its much right now, but it has a B and M ratchet shifter, and Racing seats. i will keep everyone posted as i do things,...

savageracer6969 · savageracer6969

this is how i bought it in 95 blew the 305 the first week and put in a 300hp 350

Quikerstop · Quikerstop

This is my 1979 Pontiac Firebird that i bought in october of 2007. Its been a slow process but it is coming along. It was a ugly betty when i bought it and it looks a whole lot better now but still a ways till i can cruise down the street. Has a pontiac 400 and a turbo 350 tranny. Also the suspension as been re-do...

Project-RS · Project-RS

me and mike casella started there teardown on my 355 today. made good progress for what is going to be done. heres a few pics. [IMG]http://i34.photobucket.com/albums/d129/rayray81/0313001134.jpg[/IM...

351MUSTANG · 351MUSTANG

Well u all know that i killed another trasmission,but this time the car is down for the count lol so i pulled the motor to do some work in the bay and to paint the motor,

383malibu · 383malibu

finally home now ,,,have no idea where i will be going with this ,,,but confident its gonna be something nice one day ,,,,, hope for it to become like the last photo [img]http://i401.photobucket.com/album...

383malibu · 383malibu

didnt think my car had enough colors so i added this

JOHNNY93 · JOHNNY93

Running good... should be road wurthy soon.. [IMG]http://i191.photobucket.com/albums/z5/nitrouswhore/7110012...

1972468bb · 1972468bb

Picked up an 86 stang today. 5.0 5 speed. Oh yea and a 70 mm turbo. Have to do a few things like get an exhaust and will put some frame conn. in it. Then I will enjoy it.

FATBLOCKVELLE · FATBLOCKVELLE

INJECTED 8.1L 496 CI BBC .... 5 SPEED , NINE INCH ... AND THIS WINTER A TURBO.

LSX- STANG · LSX- STANG

`my foxbody LSX 6.0 swap Project, got the motor and tranmission in today ..much more to follow -- Edited by 331-stang on Saturday 6...

351MUSTANG · 351MUSTANG

New intake going on.

Topic		Started By	Replies	Views	Last Post

	STICKY: This winter projects (Preview) What is everyones plans this winter?Lets us know and keep us posted and post pictures.	351MUSTANG	22	423	Dec 13, 2010 by Mike87Monte
	78 El Camino Project (Preview) Building a car to take the 540 engine from the 55 Chevy so I don't have to put a roll bar in the 55 and/or risk wrecking it .	batcrbs	8	193	9 days ago by batcrbs
	Project Stang with LS power (Preview) Started on a new project. 88 mustang hatch body pretty much for drag radial racing and some street use. Will consist of a 408 LS with ported LS3 heads, carb and a big nitrous kit. TH400 with brake, 8.8 rear with spool and 33 spline axles. AJE front tubular frame and coilovers in front. Cage all done and jus...	LS1NOVA67	22	373	May 4th by LS1NOVA67
	My 71 Monte Project (Preview) I started on my floors today.I still have alittle cutting to do and then start welding it in, [IMG]http://i3...	351MUSTANG	15	172	February 26th by 383malibu
	86 Notchback (Preview) I bought it 15 years ago when I was 16 and it was my daily driver for 5 years. Then I turn it into my race car. It has spent the last 10 years as a mid nine second drag car. Now that I own another drag car it is time to put this one back on the street. -...	LX546	8	208	November 30th by 91notchback
	"The Sickness" - A Poor Mans Camaro Project ( 1 2 ) (Preview) 1987 Camaro LT. Started out as a parts car for my sister's 89 RS, and now i'm going to completely go through it and make it something special. PLANS: EXTERIOR: Do all body work Z28 Ground Effects with Custom SS Rocker Emblems 4" Cowl Hood (Goodmark Steel) 2002 Toyota Echo Indigo Ink Pearl Paint Pai...	LeadFootedRacer	65	1482	Sep 21, 2011 by 351MUSTANG
	another notch (Preview) almost mini tubbed thru the floor subframes,rust and rot free we got rid of the swaybar mounts,and smoothed engine bay all in all nice car/project [IMG]http://i646.photobucket.com/albums/uu188/redn...	91notchback	47	732	Aug 16, 2011 by 91notchback
	new rust free daily driver (Preview) just picked up a 72 el camino, california car, originaly gold now black, 350, auto, a/c,	62BELAIR	25	290	Aug 11, 2011 by 62BELAIR
	car is @ dmc (Preview) thats all, no pics or anything. i have been blabbing about it for the past 8 months and it is finally there. getting an 8.50 cert cage, frame connectors and a nice driveshaft loop. just got the car running about 1 hour before i put it on the trailer. should be ready in about a week and a half.	paul c	11	287	Aug 8, 2011 by paul c
	455 for my buick (Preview) i got it dyno tested and it made 473 hp @ 5200 and 526 ft. lb. @ 4200. was already making 500 ft. lb. @ 3000 where the dyno started reading. i am starting on the rear end which is a 12 bolt which will have the big bearing ford ends welded on which also use the gm drum brakes, 33 spline axles, detriot tru-trac w/ 3....	paul c	0	122	Aug 7, 2011 by paul c
	My quad cab land barge (Preview) I picked up a 68 Coronet 4 door back around September. I just really started wrenching on it when i have some spare time. Progress so far.... Rebuilt stock bottom end 360. Rebuilt 2.02 1.60 heads with mild porting, SS pro flo valves, milled, etc... High rise dual plane air gap intake Hooker super comp h...	Bigblock73	13	274	Jul 16, 2011 by paul c
	THE G-DOG 409 (Preview) stage one done -- Edited by G-DOG on Friday 22nd of July 2011 05:09:11 PM	G-DOG	3	151	Jul 11, 2011 by wildchild
	Project sleeper (Preview) Picked up another stang today. 84 notch. 6 cyl/auto. Won't stay that way for long though. http://i274.photobucket.com/albums/jj255/Bigblock72camaro/007-7.jpg http://i274.photobucket.com/albums/jj255/Bigblock72camaro/006-4.jpg http://i274.photobucket.com/albums/jj255/B...	1972468bb	24	505	Jun 27, 2011 by 1972468bb
	The 6 inch hood bolt on (Preview)	351MUSTANG	16	313	May 16, 2011 by 77 z28
	the new project (Preview) well here it is the newest project in way better shape than the regal...the plan is to keep exterior the way it is with maybe just a cowl hood for clearence... gonna clean up engine bay and patch a couple rot spots....convert it from tbi to carbed and clean up the engine bay to make it look nice [IMG]http...	monte	16	243	May 14, 2011 by Project-RS
	shaft mount rockers are sooo cool. (Preview) set up the t&d rockers using the mid-lift method, ordered the push rods and unfortunately new valve covers (had to get moroso sheetmetal ones due to the intake rockers contacting the moroso cast ones) got a good deal on amazon though, 309.00 compared to 370.00 through summit. also finished port...	paul c	12	207	May 12, 2011 by Bigblock73
	My 363" Build ( 1 2 ) (Preview) Dart SHP 4.125" 8.2" block Scat forged 3.4" crank Scat forged H-beam 5.4" rodzzz Probe 11.0:1 forged pistons Internally balanced Melling oil pump ARP studded thru-out Milodon pan with crank scraper and windage tray 250/260 .672"/.680" custom solid roller 10...	Bonz	52	618	Apr 4, 2011 by paul c
	Buickozzy Project (Preview)	351MUSTANG	0	142	Mar 4, 2011 by 351MUSTANG
	Project RS ( 1 2 3 4 ) (closed) (Preview) well ill be starting on the camaro soon. i picked up a australian 9 bolt rear end (m78) for $100. when the weather breaks ill go to jims and get the numbers off the cover and see what they mean. its much right now, but it has a B and M ratchet shifter, and Racing seats. i will keep everyone posted as i do things,...	Project-RS	168	2869	Feb 22, 2011 by Mike87Monte
	85 monte carlo build (Preview) this is how i bought it in 95 blew the 305 the first week and put in a 300hp 350	savageracer6969	21	456	Dec 21, 2010 by savageracer6969
	Project "Fire Chicken" (Preview) This is my 1979 Pontiac Firebird that i bought in october of 2007. Its been a slow process but it is coming along. It was a ugly betty when i bought it and it looks a whole lot better now but still a ways till i can cruise down the street. Has a pontiac 400 and a turbo 350 tranny. Also the suspension as been re-do...	Quikerstop	12	272	Dec 14, 2010 by Quikerstop
	my 355 build (Preview) me and mike casella started there teardown on my 355 today. made good progress for what is going to be done. heres a few pics. [IMG]http://i34.photobucket.com/albums/d129/rayray81/0313001134.jpg[/IM...	Project-RS	49	807	Oct 19, 2010 by Project-RS
	Monte work (Preview) Well u all know that i killed another trasmission,but this time the car is down for the count lol so i pulled the motor to do some work in the bay and to paint the motor,	351MUSTANG	14	295	Sep 2, 2010 by 351MUSTANG
	the future (Preview) finally home now ,,,have no idea where i will be going with this ,,,but confident its gonna be something nice one day ,,,,, hope for it to become like the last photo [img]http://i401.photobucket.com/album...	383malibu	13	304	Aug 26, 2010 by G-DOG
	added another color (Preview) didnt think my car had enough colors so i added this	383malibu	8	277	Aug 22, 2010 by 383malibu
	93 Turbo LX is running.....3yrs later... (Preview) Running good... should be road wurthy soon.. [IMG]http://i191.photobucket.com/albums/z5/nitrouswhore/7110012...	JOHNNY93	7	289	Jul 13, 2010 by JOHNNY93
	New ride (Preview) Picked up an 86 stang today. 5.0 5 speed. Oh yea and a 70 mm turbo. Have to do a few things like get an exhaust and will put some frame conn. in it. Then I will enjoy it.	1972468bb	24	386	Jul 8, 2010 by 79Lemans
	1980 OLDS CUTLASS WAGON ... 52K MILES ROT FREE (Preview) INJECTED 8.1L 496 CI BBC .... 5 SPEED , NINE INCH ... AND THIS WINTER A TURBO.	FATBLOCKVELLE	6	268	Jul 7, 2010 by FATBLOCKVELLE
	my car (Preview) `my foxbody LSX 6.0 swap Project, got the motor and tranmission in today ..much more to follow -- Edited by 331-stang on Saturday 6...	LSX- STANG	39	484	Jun 15, 2010 by G-DOG
	New intake going on. (Preview) New intake going on.	351MUSTANG	18	270	Jun 11, 2010 by monte
1 2 > Last» \| Page of 2 sorted by